Brushed DC Motor Driver Board for SimpleDCC/Arduino, 1.2V - 22V

Details

A DC motor driver circuit based on the Monolithic Power Systems MP6550 DC motor driver. This circuit can be used for bidirectional control of a brushed DC motor and other loads, such as solenoids, with a voltage range of 1.8 V to 22 V. It supplies up to approximately 1.7 A continuously and features configurable current sensing and current limiting. The board includes block terminals, such as this model.

Main Features

• Compatible with our accessory decoders and SimpleDCC-based boards
• Includes pre-soldered block terminals – no soldering required
• H-bridge motor driver: drives one DC motor, solenoid, or similar load
• Motor supply voltage range: 1.8 V to 22 V
• Logic supply voltage range: 1.8 V to 4.9 V
• Output current: up to 1.7 A continuous; operating at lower motor and logic supply voltages may reduce the maximum continuous output current
• Current-sense feedback
• Under-voltage lockout, over-current, and over-temperature protection
• Carrier board provides reverse-voltage protection up to 20 V
• Size: 12.7 mm x 15.24 mm

Useful Links

• Schematic

Note: This product is intended for modelers over 14 years of age.

Cena

36 zł

Wysyłka

Polska: 10 zł, DPD
Inne kraje: 38 zł, Priority Air Mail

Do koszyka