Add LED lighting to your dollhouse, miniature, diorama, or model with the ability to control them from mobile devices and computers without soldering. This module features 16 LED outputs that can connect at least 16 LEDs with voltages between 2V to 10V. You can control not just standard single-color LEDs but also RGB LEDs (with color changes possible through the web app). We've even added additional outputs to connect other elements like servo motors and NFC readers, bringing more interactivity to your miniature, dollhouse, or model. Everything connected to the module can be controlled from a web browser, where you can upload a photo of your miniature and place virtual LEDs on it to see exactly which lights you're controlling. Plus, you can play audio and video (or connect a supported display) without writing any code.
Main features:
- Dimensions: 67mm x 34mm x 8mm
- Based on a dual-core Xtensa LX7 MCU, capable of running at 240 MHz with 16MB flash memory and 8MB RAM.
- No Soldering required
- 16 LED outputs to connect at least 16 LEDs with 2V-10V (maximum voltage depends on the power source; for example, with USB-C power, the maximum voltage is 5V).
- Control RGB LEDs (change LED colors in real-time via the web app).
- Control lighting and other elements on your miniature, dollhouse, model, or diorama from a web browser.
- Control up to 2 servo motors.
- Built-in audio - just connect a speaker to play sounds.
- Open-source firmware based on Arduino.
- 8 GPIOs with PWM to control additional loads.
- I2C and SPI to connect external sensors like gyroscopes.
- Can be powered from USB-C and other sources with voltages between 5V - 18V.
- Over-the-air updates.
- Monthly firmware updates.
- Designed and produced in Europe.
- More cost-effective than buying and soldering together development modules and components.
- Commercial license available for everyone, including small indie brands and manufacturers. We charge a small fee (2%) per sold product using our hardware and firmware, with no additional fixed or initial fees.
- Option to connect UWB (Ultra-wideband) modules for indoor tracking with accuracy within a few centimeters.
- Option to connect an NFC reader.
- Zero vendor lock-in; you can modify the firmware as desired.
The model is intended for modelers over 14 years of age.
Cena
230 zł
Wysyłka
Polska: 10 zł, DPD
Inne kraje: 38 zł, Priority Air Mail
Do koszyka
