DCC konwerter dla Arduino, ESP32, Raspberry Pi

Details

DCC (Digital Command Controller) converter is a small circuit that transforms the DCC signal from rails into HIGH|LOW (0|1) that can be read by almost any MCU (Arduino boards, ESP32 boards, and others). The circuit also includes DCC/AC to DC converter and can be used to power layout elements with up to 22V and boards with MCU worked with 3.3V or 5V

Check out this blog post for an example of what you can do with a DCC converter.

Specifications

• Dimensions: 35mm x 18mm x 5mm
• Transform DCC signal from rails into a digital signal that can be read by MCU (ESP32 boards, Arduino boards, and others)
• Convert DCC and AC into DC (Direct Current)
• Max total current: 2A (up to 2A on outputs with 8–22V, up to 2A on outputs with 5V and up to 1A 3.3V)
• Power supply: 8-22V DCC / AC / DC
• 3 power outputs: 3.3V DC, 5V DC, 8-22V DC
• Mounting holes
• The example schematic of how to use this circuit can be found at loco.engineering/docs
• A version with soldered terminals is available here.

The model is intended for modelers over 14 years of age.

Cena

59 zł

Wysyłka

Polska: 10 zł, DPD
Inne kraje: 38 zł, Priority Air Mail

Do koszyka